Used Refurbished Dukane

Showing 1–12 of 24 results

We have a variety of used Dukane components in stock and offer them exclusively through ebay. We also offer systems based on used components which are listed on this site.

We clean and repair the units as best we can and to the extent possible we verify all functions. All of these units are sold on a 30 day money back basis (customer pays return shipping).

The following are currently available:

Sherwood Monitor/Keyboard

Ultra-Com with Electronic Pressure Regulator/Load Cell capability

Ultra-Com

Generator 20A1000 1000W 20kHz

Generator 20A1500 1500W 20kHz

200-418 Operational Control Cable

200-417 Operational Control Cable

200-479 20kHz Ultrasound Cable

200-1064 Base-Safety Switch Cable

We have several used Dukane 2000 to 3000 watt generators in both Ultra Series and DPC series in stock. They are in high demand because of the COVID-19 crisis and the situation changes daily. We are offering these only in probe systems at this time. see below.

New tributek products compatible with Dukane Ultra Series equipment also appear below.

dpc4+2200/220
2200 watt 20 kHz Dukane DPC IV+ 220 Press System for Immediate Shipment

This 2200 watt 20 kHz near top-of-the-line  Dukane press system was built in 2011 and is in very good condition.  It has been completely checked out, repairs completed and all functions verified. This DPC model can weld by time, collapse … Continued

$6,995.00 Add to cart
DPCIpair
2200 Watt 20kHz Probe System for Immediate Shipment (331-332)

These probe systems are built around 2220HN4-L1 2200 watt 20kHz DPC I generators built in 2008.  These generators are designed to be mounted in a 19-inch rack or the rack brackets/handles can be removed (if desired) and the generators will … Continued

$5,850.00 Select options
DPCIvertical
2200 Watt 20kHz Probe System for Immediate Shipment (480)

This  probe system is built around a Dukane 2220HN4-VL1 2200 watt 20kHz DPC I generator built in about 2008. This generator is designed to be mounted in an electrical cabinet hanging from the panel, preferably with a window so the … Continued

$5,550.00 Select options
Ultra 3005pair
3000 Watt 20kHz Probe System for Immediate Shipment (536-751)

These ultrasonic probe systems are built around used Dukane 20A3005 20 kHz 3000 watt generators built 1995/1996. They have a later all-digital Auto-Trac driver boards with linear ramp soft start and fully automatic tuning with front panel knob adjustable tuning … Continued

$5,010.00 Select options
Ultra 3000 974
3000 Watt 20kHz Probe System for Immediate Shipment (974)

This ultrasonic probe system is built around a used Dukane 20A3000 20 kHz 3000 watt generator built in 1996.  It has a later model all-digital Auto-Trac driver board with linear ramp soft start and fully automatic tuning with adjustable tuning … Continued

$5,010.00 Select options
AM30122
Dukane 110-3122 Transducer Replacement
Dukane 110-3122 transducer replacement used in almost all 20KHz Ultra Series, DPC, and iQ thruster and press systems that delivers rugged quality and superior value. All-new, precision made in USA in a climate-controlled ISO-registered facility. Three year limited warranty.
$1,890.00 Add to cart
Dukane 41C30 Transducer Replacement
Dukane 41C30 probe transducer replacement used with almost all 20KHz Ultra Series, DPC, and iQ generators that delivers rugged quality and superior value. All-new, precision made in USA in a climate-controlled ISO-registered facility. Three year limited warranty.
$1,980.00 Add to cart
USC2MJ20
Generator Start Cable for Dukane Ultra Series 2 meter

This cable connects to the J20 jack on the rear of any Dukane Ultra series generator.  On dry contact closure it provides 24VDC to the driver board and runs ultrasound until the contact opens. For safety reasons, when using this … Continued

$75.00 Add to cart
CSHV03M
Ultrasound Cable Standard RF Coax SHV-SHV 3 meter
This style of cable is used with most Dukane machines and many Branson machines.  Terminated at both ends by SHV connectors and appropriate for use with ultrasonic power supplies/generators up to and including 3000 watts power output. Not for use with power supplies/generators rated beyond 3000 watts. Made in USA
$150.00 Add to cart
RS200
Ring Stand Holder for 20KHz Ultrasonic Stacks
This anodized aluminum holder clamps to almost any ring stand and securely holds an ultrasonic stack using a booster having a mounting ring with a diameter of between 2.65" (67 mm) and 3.25" (83 mm), which is most of the standard ones. To mount a stack, set the holder to an appropriate height on the ring stand and simply hang the stack in the holder. Not using a booster? Flip the holder over and use the other side, which is a better fit for converters with diameters between 2.65" (67 mm) and 2.99" (76 mm) which includes almost all 20KHz converters of at least 500 watt power capability.
$200.00 Add to cart
20 KHz Titanium Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure.  Input and output threads are 1/2-20.  Adapter studs are available if required. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5
$795.00 Select options
20 KHz Aluminum Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure.  Input and output threads are 1/2-20.  Adapter studs are available if required. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5
$535.00 Select options