Back to Plastic Welder Parts & Supplies

Digital Timer for Dukane Hand Probes

$595.00

This all-new aftermarket timer unit can take over timing of a Dukane hand probe utilizing any generator having a round plastic jack labeled J20. Includes a programmable digital timer in an aluminum enclosure and a J20 cable/connector to connect to your Dukane ultrasonic generator, and has a round plastic J8 jack to connect to the switch on your Dukane hand probe.

Typically ships 5-7 days after order.

SKU: DPT175 Categories: ,

Description

This all-new aftermarket timer unit can take over timing of a Dukane hand probe utilizing any generator having a round plastic jack labeled J20. Includes a programmable digital timer in an aluminum enclosure and a J20 cable/connector to connect to your Dukane ultrasonic generator, and has a round plastic J8 jack to connect to the switch on your Dukane hand probe.

This unit can replace a failed 43A175 digital timer either in standalone configuration or built into a generator. If your hand probe is being used with an Ultra-Com in time only mode, this unit can also replace that unit. Even if your hand probe system never had a timer at all, if the generator has a round plastic J20 jack, you can use this unit.

Please note that this unit CANNOT run a press or thruster.

Warranty: 90-Day repair or replace if material or workmanship is found defective upon return to www.tributek.biz.

Typically ships 5-7 days after order.

Additional information

Weight 4 lbs
Dimensions 10 × 8 × 8 in

You may also like…
High Pressure Silicone Ultrasonic Stack Grease
The function of grease in the joint is to: 1. Fill the microscopic valleys in the surface of the tooling to improve acoustic transfer from one component to the next. 2. Remain in the joint so the metal of the two pieces of tooling do not become "clad" together by the action of the ultrasound and thus impossible to disassemble. Never use grease and a polymer washer in the same joint.
not rated $1.95 Add to cart
stud
Horn/Booster Stud for Ultrasonic Tooling
These specially heat-treated steel studs have cup points, and are chemically blackened. No warranty.
not rated $1.95 Select options
ST20STEP
Step Stud 1/2-20 to 3/8-24
This is a specially heat treated steel socket-head stud with 1/2-20 threads on one end and 3/8-24 threads on the other. Used for adapting horns to boosters that do not have the same thread size. No warranty.
not rated $16.00 Add to cart
40spanner
Spanner Wrench 30/40KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 30 and 40 KHz transducers/converters, boosters, and horns/sonotrodes. Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
not rated $36.00 Add to cart
Polymer (Mylar) Washers for Stack Joints (35 pack)
These washers made of heat-resistant Mylar(TM) can be used instead of high pressure silicone grease in ultrasonic stack joints. IMPORTANT: Use a new washer each time the tooling is reassembled. Do not use both grease and a washer in the same joint. Washers come 35 to a pack. Order the number of packs you want, not the number of washers.
not rated $26.50 Select options
20spanner
Spanner Wrench 15/20KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 15 and 20 KHz transducers/converters, boosters, and horns/sonotrodes. Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
not rated $36.00 Add to cart
20TV900
20KHz Stack Vise for Ultrasonic Tooling
This stainless steel stack vise is designed specifically to clamp 20KHz converter front slugs and booster spanner "collars" during assembly or disassembly to reduce damage to expensive ultrasonic stack components. The vise features two clamping chambers, one for tooling 1.5" (38 mm) dia. and one for tooling 1.8" (46 mm) dia. The two-pin hinge design allows the upper jaw to "float" and seek the best clamp position on the tool for maximum contact. The securing bolt has a long lever handle that can be re-positioned out of the way once secured. The securing bolt can be completely removed so the upper vise jaw can be fully opened. The steel spanner-hole pins are set in stepped holes such that they can be driven out from the bottom of the vise should they ever need replacement.
not rated $380.00 Add to cart

Related products
20 KHz Aluminum Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure.  Input and output threads are 1/2-20.  Adapter studs are available if required. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.24, 1.5, 1.75, 2.0, 2.5
not rated $535.00 Select options
Branson CR-20S Converter Replacement
This aftermarket replacement converter replaces machinery-mounted probe converter CR-20S (125-135-115R), which has a SHV jack used with coax cable to 20KHz 2000, 2000X, and DCX series power supplies.  Three-year limited warranty.  All-new precision made in the USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.
not rated $1,810.00 Add to cart
Branson CR-20 Converter Replacement
Aftermarket replacement converter for Branson model CR-20 using the military-style connector, for use with 20KHz 2000, 2000X and DCX series power supplies. Precision made in USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.  Three year limited warranty.
not rated $1,710.00 Add to cart
RS200B
Ring Stand Holder with Clamp Blocks for 20KHz Ultrasonic Stacks
This anodized aluminum holder clamps to almost any ring stand and securely holds an ultrasonic stack using a booster having a mounting ring with a diameter of between 2.65" (67 mm) and 3.25" (83 mm), which is most of the standard ones. To mount a stack, set the holder to an appropriate height on the ring stand and simply hang the stack in the holder and clamp it with the blocks.
not rated $260.00 Add to cart