Description
Aluminum 1.0 gain booster
Ring size 3.25″ (83mm) dia by 0.75″ (19mm) thick
Stud 1/2-20 output thread 3/8-24
Booster is used. Photo is of the item you will receive if ordered.
Used Booster Dukane/Branson 1.0 gain 900/2000/HD Aluminum
$150.00
1 in stock
Related products
Branson CR-20S Converter Replacement
This aftermarket replacement converter replaces machinery-mounted probe converter CR-20S (125-135-115R), which has a SHV jack used with coax cable to 20KHz 2000, 2000X, and DCX series power supplies. Three-year limited warranty. All-new precision made in the USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.
Back-to-Back SHV Bulkhead Connector
This back-to back SHV connector connects with the standard ultrasound cable-mounted SHV connector to connect through a panel into an enclosure or make another SHV ultrasound cable into an extension cable.
This item comes with all you see in the photo: connector, silicone rubber gasket, lock washer and nut.
20 KHz Aluminum Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure. Input and output threads are 1/2-20. Adapter studs are available if required.
All-new, precision made in USA. One year limited warranty.
PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5
20KHz Stack Vise for Ultrasonic Tooling
This stainless steel stack vise is designed specifically to clamp 20KHz converter front slugs and booster spanner "collars" during assembly or disassembly to reduce damage to expensive ultrasonic stack components.
The vise features two clamping chambers, one for tooling 1.5" (38 mm) dia. and one for tooling 1.8" (46 mm) dia. The two-pin hinge design allows the upper jaw to "float" and seek the best clamp position on the tool for maximum contact. The securing bolt has a long lever handle that can be re-positioned out of the way once secured. The securing bolt can be completely removed so the upper vise jaw can be fully opened. The steel spanner-hole pins are set in stepped holes such that they can be driven out from the bottom of the vise should they ever need replacement.