Column Collar 3.5″ (89 mm)
This blacked steel two-piece collar fits all ultrasonic presses using a 3.5" (89mm) column, which includes many USA-built ultrasonic machines and some other makes. Split blackened steel collar 3.5" (89mm) i.d. with two bolts.
$110.00 Add to cart
CoolingCap
Cooling Cap for Dukane 41C30 Replacement Transducer
Fits tributek AM30122C replacement for Dukane 41C30. To mount, remove two of the top plug retaining screws, work the cap body over the housing aligning the two holes in the cap with the two open screw holes in the transducer housing and secure with the two screws provided using blue thread locker. These Cooling Caps also fit Dukane made 41C30 but the cooling holes in the top plug of the housing should be covered with heat-resistant tape as there will be a gap between the top of the transducer and the inner surface of the top of the cap. Kit contains cap and two screws.
$15.00 Add to cart
AM30122
Dukane 110-3122 Transducer Replacement
Dukane 110-3122 transducer replacement used in almost all 20KHz Ultra Series, DPC, and iQ thruster and press systems that delivers rugged quality and superior value. All-new, precision made in USA in a climate-controlled ISO-registered facility. Three year limited warranty.
$1,890.00 Add to cart
Dukane 41C30 Transducer Replacement
Dukane 41C30 probe transducer replacement used with almost all 20KHz Ultra Series, DPC, and iQ generators that delivers rugged quality and superior value. All-new, precision made in USA in a climate-controlled ISO-registered facility. Three year limited warranty.
$2,180.00 Add to cart
USC2MJ20
Generator Start Cable for Dukane Ultra Series 2 meter

This cable connects to the J20 jack on the rear of any Dukane Ultra series generator.  On dry contact closure it provides 24VDC to the driver board and runs ultrasound until the contact opens. For safety reasons, when using this … Continued

$75.00 Add to cart
Pair of Keys for Dukane Ultra-Com or DPCIII

Thousands of Dukane Ultra-Coms and DPCIIIs shipped all over the world between 1985 and 2008.  All of them shipped with two keys, and it is safe to say that most of those keys have been lost by now.  If that … Continued

$17.00 Add to cart
powercordwhip
Power Cord for Dukane DPC or iQ Generator 2 meter

This 2 meter power cord has a molded-on IEC19 connector on one end and terminates in a North American 120V plug (‘.’), 240V plug (-.-) or whip (wires).

Select options This product has multiple variants. The options may be chosen on the product page
Step Stud 1/2-13 to M20-2.5

If the ultrasonic horn/sonotrode you have to run was made for some other piece of equipment you will possibly need one of these.  Most 15 kHz and 20kHz ultrasonic equipment made in North America and much of the rest of … Continued

$45.00 Add to cart
Setp Stud 1/2-20 to M12-1.25
Step Stud 1/2-20 to M12-1.25

If the ultrasonic horn/sonotrode you have to run was made for some other piece of equipment you will possibly need one of these.  Most 15 kHz and 20kHz ultrasonic equipment made in North America and much of the rest of … Continued

$40.00 Add to cart
Step Stud 1/2-20 to M12-1.75
Step Stud 1/2-20 to M12-1.75

If the ultrasonic horn/sonotrode you have to run was made for some other piece of equipment you will possibly need one of these.  Most 15 kHz and 20kHz ultrasonic equipment made in North America and much of the rest of … Continued

$40.00 Add to cart
CSHV03M
Ultrasound Cable Standard RF Coax SHV-SHV 11 meter

This style of cable is used with most Dukane machines and many Branson machines.  Terminated at both ends by SHV connectors and appropriate for use with ultrasonic power supplies/generators up to and including 3000 watts power output. Not for use … Continued

$210.00 Add to cart
CSHV03M
Ultrasound Cable Standard RF Coax SHV-SHV 3 meter
This style of cable is used with most Dukane machines and many Branson machines.  Terminated at both ends by SHV connectors and appropriate for use with ultrasonic power supplies/generators up to and including 3000 watts power output. Not for use with power supplies/generators rated beyond 3000 watts. Made in USA
$165.00 Add to cart