converter
Showing 1–12 of 19 results
1800 watt 30 kHz Dukane iQ Press System gently used
This 1800 watt 30 kHz Dukane iQ press system was built in 2019 and is in very good condition, having been used only in a prototyping lab. This model is still in production today and fully supported by Dukane parts and service..
This model can weld by time, collapse distance, absolute distance, energy, peak power, or ground detect. It can weld in dual pressure mode or use a second pressure for hold. It uses a 1 micron optical linear encoder and has an advanced processor with very high sampling rate. The generator has line/load regulation so programmed generator amplitude is what you get. The flow-through cooling system has all components that generate heat mounted on heat sinks that protrude into a cooling tunnel with a thermostatically-operated cooling fan that prevents plant air from coming into contact with circuit board components and minimizes heat-blanket effect that can shorten component life. The press utilizes aluminum castings plus a thick-wall drawn-over-mandrel hard-chromed steel column for high rigidity. The nickel-plated steel fixture mounting plate is easily removable for drilling of additional mounting hole patterns, replacement or resurfacing/re-plating.
2400 watt 20 kHz Dukane iQ Press System built 2018
2400 watt 20 kHz Dukane iQ press system. This welder is in very good condition and ready to go.
Pneumatic press with limit switch kit, dual pressure welding, distance, absolute distance welding modes.
Optical safety switches (anti-tie-down) and twist to reset e-stop are installed in the base. All original Dukane cables.
System includes a 20 kHz 2400 Watt Dukane iQ generator/controller with all the advantages of the iQ in precision and reliability.
40 kHz 700 Watt Dukane Ultra-Com System
This is a late 1980s/1990s Dukane 40 kHz 700 watt Ultra-Com system that welds by time, absolute distance, collapse distance, energy or peak power, with programmable secondary controls and bad or suspect part limits on all primary parameters. This system has a second generation Ultra-Com weld controller.
Branson CR-20S Converter Replacement (short version)
The CR-20S is only as long as it is because Branson made it using the same housing as the CR-20. This model mounts the connectors and ground lug directly in the insulator disc of our CJ-20 replacement model (AM44C20), making the housing about 1.25" (32 mm) shorter overall, the same length as a CJ-20. Making this model shorter lets us leave off the machined aluminum cap that makes our CR-20S replacement (AM44C20RS) about the same length as Branson's, but if it the extra length doesn't matter to you this model does exactly the same job as our CR-20S replacement model (AM44C20RS) at an even lower price, Maybe Branson already builds one like this. Maybe if they don't they will some day soon.
This aftermarket replacement converter replaces machinery-mounted probe converter CR-20S (125-135-115R), which has a SHV jack used with coax cable to 20KHz 2000, 2000X, and DCX series power supplies. Three-year limited warranty. All-new precision made in the USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.
Cooling Cap for Dukane 41C30 Replacement Transducer
Fits tributek AM30122C replacement for Dukane 41C30.
To mount, remove two of the top plug retaining screws, work the cap body over the housing aligning the two holes in the cap with the two open screw holes in the transducer housing and secure with the two screws provided using blue thread locker.
These Cooling Caps also fit Dukane made 41C30 but the cooling holes in the top plug of the housing should be covered with heat-resistant tape as there will be a gap between the top of the transducer and the inner surface of the top of the cap.
Kit contains cap and two screws.
Ultrasonic Generators
Our digital generators have an exhaustive list of features, including: — All digital control of all parameters — Multi-core main processor with a data rate of 0.5 ms — Digital continuous automatic tuning — True RMS overload protection — Selectable … Continued
Ultrasonic Probe Systems
Highly advanced probe systems for automation or continuous-processing applications with all the best features, made in USA. A fantastic value! We are pleased to offer highly engineered probe systems and components utilizing advanced digital generator technology and trusted robust highly … Continued
Ultrasound Cable Standard RF Coax SHV-SHV 3 meter
This style of cable is used with most Dukane machines and many Branson machines. Terminated at both ends by SHV connectors and appropriate for use with ultrasonic power supplies/generators up to and including 3000 watts power output.
Not for use with power supplies/generators rated beyond 3000 watts.
Made in USA
Branson CJ-20 Converter Replacement
Branson CJ-20 converter (101-135-059) replacement used in all 20KHz 2000, 2000X and DCX series IW, actuator and assembly stand systems that delivers rugged quality and superior value. All-new, precision made in USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility. Three year limited warranty.
Branson 902J Converter Replacement
Replacement converter for Branson model 902J (101-135-047), for use with 910IW or IW+ intergrated benchtop welders or 905 or 910 D/M (500 and 1000 watt) power supplies using actuator or assembly stand units. All-new, precision made in USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility. Three year limited warranty.
Branson 902J Converter Replacement (Ugly)
LAST ONE! Replacement converter for Branson model 902J (101-135-047), for use with 905 or 910IW or IW+ intergrated benchtop welders or 905 or 910 (500 and 1000 watt) power supplies using actuator or assembly stand units. All-new, precision made in USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility. One year limited warranty, because they're Ugly.
Branson CR-20 Converter Replacement
Aftermarket replacement converter for Branson model CR-20 using the military-style connector, for use with 20KHz 2000, 2000X and DCX series power supplies. Precision made in USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility. Three year limited warranty.