40 KHz Aluminum Booster 1.937 inch ring for Branson or Dukane

$255.00

These 40KHz aluminum boosters are precision made from certified materials and tuned to tight frequency tolerances for trouble free operation. These boosters are recommended for all 40KHz applications for their heat-dissipating properties.

They are constructed with a 1.937″ diameter mounting ring set that is made to be disassembled for o-ring replacement.  Input stud is 8mm, output thread is 8mm.

Fits virtually all Branson and Dukane 40 KHz systems, and many others. Check mounting ring and stud sizes to be sure.

All-new, precision made in USA. One year limited warranty.

PLEASE SPECIFY GAIN RATIO: 0.5, 0.7, 1.0, 1.5, 2.0, 2.5

Clear selection

Description

These 40KHz aluminum boosters are precision made from certified materials and tuned to tight frequency tolerances for trouble free operation. These boosters are recommended for all 40KHz applications for their heat-dissipating properties.

They are constructed with a 1.937″ diameter mounting ring set that is made to be disassembled for o-ring replacement.  Input stud is 8mm, output thread is 8mm.

Fits virtually all Branson and Dukane 40 KHz systems, and many others. Check mounting ring and stud sizes to be sure.

All-new, precision made in USA. One year limited warranty.

Additional information

Weight 1.5 lbs
Dimensions 6 × 6 × 4 in

You may also like…

40spanner
Spanner Wrench 30/40KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 30 and 40 KHz transducers/converters, boosters, and horns/sonotrodes. Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
not rated $36.00 Add to cart
Polymer (Mylar) Washers for Stack Joints (35 pack)
These washers made of heat-resistant Mylar(TM) can be used instead of high pressure silicone grease in ultrasonic stack joints. IMPORTANT: Use a new washer each time the tooling is reassembled. Do not use both grease and a washer in the same joint. Washers come 35 to a pack. Order the number of packs you want, not the number of washers.
not rated $26.50 Select options
High Pressure Silicone Ultrasonic Stack Grease
The function of grease in the joint is to: 1. Fill the microscopic valleys in the surface of the tooling to improve acoustic transfer from one component to the next. 2. Remain in the joint so the metal of the two pieces of tooling do not become "clad" together by the action of the ultrasound and thus impossible to disassemble. Never use grease and a polymer washer in the same joint.
not rated $1.95 Add to cart