Description
These specially heat-treated steel studs have cup points, and are chemically blackened. No warranty.
These studs are typically used with 15 kHz ultrasonic tooling.
Back to Plastic Welder Parts & Supplies
Horn/Booster Stud 1/2-20 by 2.0 inch for ultrasonic tooling
$4.50
These specially heat-treated steel studs have cup points, and are chemically blackened. No warranty.
10 in stock (can be backordered)
You may also like…
20KHz Stack Vise for Ultrasonic Tooling
This stainless steel stack vise is designed specifically to clamp 20KHz converter front slugs and booster spanner "collars" during assembly or disassembly to reduce damage to expensive ultrasonic stack components.
The vise features two clamping chambers, one for tooling 1.5" (38 mm) dia. and one for tooling 1.8" (46 mm) dia. The two-pin hinge design allows the upper jaw to "float" and seek the best clamp position on the tool for maximum contact. The securing bolt has a long lever handle that can be re-positioned out of the way once secured. The securing bolt can be completely removed so the upper vise jaw can be fully opened. The steel spanner-hole pins are set in stepped holes such that they can be driven out from the bottom of the vise should they ever need replacement.
Spanner Wrench 30/40KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 30 and 40 KHz transducers/converters, boosters, and horns/sonotrodes.
Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
Spanner Wrench 15/20KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 15 and 20 KHz transducers/converters, boosters, and horns/sonotrodes.
Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
High Pressure Silicone Ultrasonic Stack Grease
The function of grease in the joint is to:
1. Fill the microscopic valleys in the surface of the tooling to improve acoustic transfer from one component to the next.
2. Remain in the joint so the metal of the two pieces of tooling do not become "clad" together by the action of the ultrasound and thus impossible to disassemble.
Never use grease and a polymer washer in the same joint.
Step Stud 1/2-20 to 3/8-24
This is a specially heat treated steel socket-head stud with 1/2-20 threads on one end and 3/8-24 threads on the other. Used for adapting horns to boosters that do not have the same thread size.
No warranty.
Related products
Branson CR-20S Converter Replacement
This aftermarket replacement converter replaces machinery-mounted probe converter CR-20S (125-135-115R), which has a SHV jack used with coax cable to 20KHz 2000, 2000X, and DCX series power supplies. Three-year limited warranty. All-new precision made in the USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.
Branson CH-20S Converter Replacement
This aftermarket replacement converter replaces sealed machinery-mounted probe converter CH-20S (159-135-075R), which has a SHV jack used with coax cable to 20KHz 2000, 2000X, and DCX series power supplies. Three-year limited warranty. All-new precision made in the USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.
20KHz Full Wave Water Cooled Booster
This 20 KHz full wave liquid/water cooled booster assembly provides ultimate stack temperature management.
PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5
Ultrasonic Generators
Our digital generators have an exhaustive list of features, including: — All digital control of all parameters — Multi-core main processor with a data rate of 0.5 ms — Digital continuous automatic tuning — True RMS overload protection — Selectable … Continued