Description
Aluminum 0.5 gain booster
Ring size 3.00″ (76mm) dia by 0.63″ (16mm) thick
Stud 1/2-20 output thread 3/8-24
Booster is used. Photo is typical of the item you will receive if ordered.
Used Booster Branson/Sonics and Materials 0.5 gain 800/400 Aluminum
$100.00
3 in stock
Related products
Ring Stand Holder with Clamp Blocks for 20KHz Ultrasonic Stacks
This anodized aluminum holder clamps to almost any ring stand and securely holds an ultrasonic stack using a booster having a mounting ring with a diameter of between 2.65" (67 mm) and 3.25" (83 mm), which is most of the standard ones.
To mount a stack, set the holder to an appropriate height on the ring stand and simply hang the stack in the holder and clamp it with the blocks.
High Pressure Silicone Ultrasonic Stack Grease
The function of grease in the joint is to:
1. Fill the microscopic valleys in the surface of the tooling to improve acoustic transfer from one component to the next.
2. Remain in the joint so the metal of the two pieces of tooling do not become "clad" together by the action of the ultrasound and thus impossible to disassemble.
Never use grease and a polymer washer in the same joint.
Spanner Wrench 30/40KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 30 and 40 KHz transducers/converters, boosters, and horns/sonotrodes.
Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
Spanner Wrench 15/20KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 15 and 20 KHz transducers/converters, boosters, and horns/sonotrodes.
Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.