Description
These specially heat-treated steel studs have cup points, and are chemically blackened. No warranty.
These studs are typically used with 30 kHz and 40 kHz ultrasonic tooling.
Back to Plastic Welder Parts & Supplies
Horn/Booster Stud 8mm for Ultrasonic Tooling
$4.50
These specially heat-treated steel studs have cup points, and are chemically blackened. No warranty.
You may also like…
20KHz Stack Vise for Ultrasonic Tooling
This stainless steel stack vise is designed specifically to clamp 20KHz converter front slugs and booster spanner "collars" during assembly or disassembly to reduce damage to expensive ultrasonic stack components.
The vise features two clamping chambers, one for tooling 1.5" (38 mm) dia. and one for tooling 1.8" (46 mm) dia. The two-pin hinge design allows the upper jaw to "float" and seek the best clamp position on the tool for maximum contact. The securing bolt has a long lever handle that can be re-positioned out of the way once secured. The securing bolt can be completely removed so the upper vise jaw can be fully opened. The steel spanner-hole pins are set in stepped holes such that they can be driven out from the bottom of the vise should they ever need replacement.
Spanner Wrench 30/40KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 30 and 40 KHz transducers/converters, boosters, and horns/sonotrodes.
Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
Step Stud 1/2-20 to 3/8-24
This is a specially heat treated steel socket-head stud with 1/2-20 threads on one end and 3/8-24 threads on the other. Used for adapting horns to boosters that do not have the same thread size.
No warranty.
High Pressure Silicone Ultrasonic Stack Grease
The function of grease in the joint is to:
1. Fill the microscopic valleys in the surface of the tooling to improve acoustic transfer from one component to the next.
2. Remain in the joint so the metal of the two pieces of tooling do not become "clad" together by the action of the ultrasound and thus impossible to disassemble.
Never use grease and a polymer washer in the same joint.
Spanner Wrench 15/20KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 15 and 20 KHz transducers/converters, boosters, and horns/sonotrodes.
Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
Related products
Dukane 41C30 Transducer Replacement
Dukane 41C30 probe transducer replacement used with almost all 20KHz Ultra Series, DPC, and iQ generators that delivers rugged quality and superior value. All-new, precision made in USA in a climate-controlled ISO-registered facility. Three year limited warranty.
Branson CH-20C Converter Replacement
This aftermarket replacement converter replaces sealed machinery-mounted probe converter CH-20C (159-135-211R), which has a one meter coax cable and SHV jack used with 20KHz 2000, 2000X, and DCX series power supplies. Three-year limited warranty. All-new precision made in the USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.
20 KHz Titanium Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure. Input and output threads are 1/2-20. Adapter studs are available if required.
All-new, precision made in USA. One year limited warranty.
PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5
Branson CH-20S Converter Replacement
This aftermarket replacement converter replaces sealed machinery-mounted probe converter CH-20S (159-135-075R), which has a SHV jack used with coax cable to 20KHz 2000, 2000X, and DCX series power supplies. Three-year limited warranty. All-new precision made in the USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.