Description
This 2 meter power cord has a molded-on IEC19 connector on one end and terminates in a North American 120V plug (‘.’), 240V plug (-.-) or whip (wires).
Back to Plastic Welder Parts & Supplies
Power Cord for Dukane DPC or iQ Generator 2 meter
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 8 × 6 × 1 in |
| Cord Termination | N. America 120V ('.'), N. America 240V (-.-), Whip (wires) |
You may also like…
Ultrasound Cable Standard RF Coax SHV-SHV 3 meter
This style of cable is used with most Dukane machines and many Branson machines. Terminated at both ends by SHV connectors and appropriate for use with ultrasonic power supplies/generators up to and including 3000 watts power output.
Not for use with power supplies/generators rated beyond 3000 watts.
Made in USA
Ultrasound Cable Standard RF Coax SHV-SHV 11 meter
This style of cable is used with most Dukane machines and many Branson machines. Terminated at both ends by SHV connectors and appropriate for use with ultrasonic power supplies/generators up to and including 3000 watts power output. Not for use … Continued
Related products
Branson CJ-20 Converter Replacement
Branson CJ-20 converter (101-135-059) replacement used in all 20KHz 2000, 2000X and DCX series IW, actuator and assembly stand systems that delivers rugged quality and superior value. All-new, precision made in USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility. Three year limited warranty.
Branson CR-20 Converter Replacement
Aftermarket replacement converter for Branson model CR-20 using the military-style connector, for use with 20KHz 2000, 2000X and DCX series power supplies. Precision made in USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility. Three year limited warranty.
Step Stud 1/2-20 to 3/8-24
This is a specially heat treated steel socket-head stud with 1/2-20 threads on one end and 3/8-24 threads on the other. Used for adapting horns to boosters that do not have the same thread size.
No warranty.
High Pressure Silicone Ultrasonic Stack Grease
The function of grease in the joint is to:
1. Fill the microscopic valleys in the surface of the tooling to improve acoustic transfer from one component to the next.
2. Remain in the joint so the metal of the two pieces of tooling do not become "clad" together by the action of the ultrasound and thus impossible to disassemble.
Never use grease and a polymer washer in the same joint.