3000 Watt 20kHz Probe System for Immediate Shipment (536-751)


1 in stock


These ultrasonic probe systems are built around used Dukane 20A3005 20 kHz 3000 watt generators built 1995/1996. They have a later all-digital Auto-Trac driver boards with linear ramp soft start and fully automatic tuning with front panel knob adjustable tuning phase angle. They use an analog high voltage power supply and matching module with the high power switching transistors set in an external heat sink plus the option high volume external cooling fan package. Rear panel variac jacks are disabled.  The have a front panel “power” knob allowing amplitude setting from 100% to about 40%.  They have a unique keyswitch that allows them to operate either a Dukane 110-3122 driver or a Branson 502 driver (they are in Dukane position and the key is lost).  These generators are a model developed specifically for continuous running at high power on difficult stack configurations on a difficult application.. This model won a three-way competition in the late 1980s based on performance, durability and sustained high power operation under extreme conditions.  These generators have been recently inspected and checked out for operation, are in good shape for their age and ready to run on 200-240 VAC single phase 50/60 Hz 25 amps, mounted power cords ends in whips (wires). Warranty is 30-day money back or exchange in the USA, no return or refund on international sale.

Each generator is matched to a new tributek AM30122C 3000W transducer (replaces Dukane 41C30) with three year limited warranty (or 2,080 ultrasound hours, whichever is less).

New BT30250 titanium booster by tributek with 3.25″ ring (specify gain ratio) 1/2-20 input and output threads, one year warranty.

New CSHV03M ultrasound cable SHV/SHV by tributek, 3 meters, one year warranty.

USC2MJ20 generator start cable by tributek, 2 meters (connector is used, cord is new), one year warranty. Generator runs ultrasound on dry contact closure (24 vdc) between the two wires, stops when contact goes open. Strongly recommend this contact closure be hold relay style so if station control voltage is lost (for example in emergency stop condition or control voltage power supply failure) the generator stops. One year warranty.

All above made in USA.

One system available only and subject to prior sale.

Additional information

Weight 40 lbs
Dimensions 29 × 22 × 7 in
Booster Gain

0.5, 0.75, 1.0, 1.5, 2.0, 2.5

You may also like…

Ultrasound Cable Standard RF Coax SHV-SHV 3 meter
This style of cable is used with most Dukane machines and many Branson machines.  Terminated at both ends by SHV connectors and appropriate for use with ultrasonic power supplies/generators up to and including 3000 watts power output. Not for use with power supplies/generators rated beyond 3000 watts. Made in USA
$165.00 Add to cart
Dukane 41C30 Transducer Replacement
Dukane 41C30 probe transducer replacement used with almost all 20KHz Ultra Series, DPC, and iQ generators that delivers rugged quality and superior value. All-new, precision made in USA in a climate-controlled ISO-registered facility. Three year limited warranty.
$2,180.00 Add to cart
20 KHz Titanium Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure.  Input and output threads are 1/2-20.  Adapter studs are available if required. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5
$950.00 Add to cart
Generator Start Cable for Dukane Ultra Series 2 meter

This cable connects to the J20 jack on the rear of any Dukane Ultra series generator.  On dry contact closure it provides 24VDC to the driver board and runs ultrasound until the contact opens. For safety reasons, when using this … Continued

$75.00 Add to cart