Branson CR-20C Converter Replacement

$2,160.00

This aftermarket replacement converter replaces machinery-mounted probe converter CR-20C (125-135-210R), which has a one meter cable and SHV jack used with 20KHz 2000, 2000X, and DCX series power supplies.  Three-year limited warranty.  All-new precision made in the USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.

Description

The AM44C20RC model is a modification of our AM44C20 that incorporates a one-meter coax cable with SHV connector and 6mm OD push-in air fitting. These units will be made to order from in-stock parts and are available for shipment typically within two business days from receipt of your order.

All of the components used in construction of these converters are all new, not recovered from scrapped units. These converters are made in a highly controlled and repeatable manner to duplicate the performance of the OEM models. The parts are made from certified materials in tightly controlled manufacturing processes, assembled and tested in a climate-controlled environment using carefully calibrated equipment, then properly aged and re-tested to ensure performance that duplicates the OEM part. The entire process is conducted in a ISO registered facility. Best of all, since the manufacturing process is so carefully controlled, durability is assured.

Our converters do not look like a Branson CR-20C even though specifically designed to replace them. Chrome plating is expensive and non-functional, as is grooving the housing. We note that many suppliers who copy Branson’s appearance also use the CR-20C model designation, possibly to cause buyers to think they are getting a CR-20C made by Branson.

We worked very hard to incorporate functional improvements to the OEM design to make these units more durable. We left no stone unturned to try to give you the best product anyone knows how to make. We are proud to make a unit that looks different and probably outperforms the OEM unit. As with replacement parts for automobiles, often the aftermarket part is much better and less expensive than the OEM part.

We offer the same warranty as the OEM, namely, three years one-time replacement. Simply ship the broken unit back to arrive within three years of original shipment, and it will be replaced (one time) if the failure is the result of a defect in material or workmanship. See the warranty link below for the particulars.

We believe this is an excellent option for those customers desiring the excellent reliability and value of a tributek converter in a machine-mount configuration.

 

Additional information

Weight 3.7 lbs
Dimensions 12 × 6 × 5 in

You may also like…

20TV900
Ultrasonic Tooling Vise for CJ-20/CR-20/CH-20/CS-20
This stainless steel stack vise is designed specifically to clamp 20KHz converter front slugs and booster spanner "collars" during assembly or disassembly to reduce damage to expensive ultrasonic stack components. The vise features two clamping chambers, one for tooling 1.625" (41 mm) dia. and one for tooling 1.8" (46 mm) dia. The two-pin hinge design allows the upper jaw to "float" and seek the best clamp position on the tool for maximum contact. The securing bolt has a long lever handle that can be re-positioned out of the way once secured. The securing bolt can be completely removed so the upper vise jaw can be fully opened. The steel spanner-hole pins are set in stepped holes such that they can be driven out from the bottom of the vise should they ever need replacement.
$565.00 Add to cart
20 KHz Titanium Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure.  Input and output threads are 1/2-20.  Adapter studs are available if required. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5
$950.00 Add to cart
ST20STEP
Step Stud 1/2-20 to 3/8-24
This is a specially heat treated steel socket-head stud with 1/2-20 threads on one end and 3/8-24 threads on the other. Used for adapting horns to boosters that do not have the same thread size. No warranty.
$22.00 Add to cart
20 KHz Aluminum Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure.  Input and output threads are 1/2-20.  Adapter studs are available if required. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5
$630.00 Add to cart
20spanner
Spanner Wrench 15/20KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 15 and 20 KHz transducers/converters, boosters, and horns/sonotrodes. Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
$45.00 Add to cart
High Pressure Silicone Ultrasonic Stack Grease
The function of grease in the joint is to: 1. Fill the microscopic valleys in the surface of the tooling to improve acoustic transfer from one component to the next. 2. Remain in the joint so the metal of the two pieces of tooling do not become "clad" together by the action of the ultrasound and thus impossible to disassemble. Never use grease and a polymer washer in the same joint.
$3.50 Add to cart
17CSHV
Back-to-Back SHV Bulkhead Connector
This back-to back SHV connector connects with the standard ultrasound cable-mounted SHV connector to connect through a panel into an enclosure or make another SHV ultrasound cable into an extension cable. This item comes with all you see in the photo: connector, silicone rubber gasket, lock washer and nut.
$56.00 Add to cart
stud
Horn/Booster Stud 1/2-20 by 1.25 for Ultrasonic Tooling
These specially heat-treated steel studs have cup points, and are chemically blackened. No warranty.
$4.50 Add to cart
Branson CH-20C Converter Replacement
This aftermarket replacement converter replaces sealed machinery-mounted probe converter CH-20C (159-135-211R), which has a one meter coax cable and SHV jack used with 20KHz 2000, 2000X, and DCX series power supplies.  Three-year limited warranty.  All-new precision made in the USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.
$2,250.00 Add to cart