Pair of Keys for Dukane Ultra-Com or DPCIII

$17.00

4 in stock

Description

Thousands of Dukane Ultra-Coms and DPCIIIs shipped all over the world between 1985 and 2008.  All of them shipped with two keys, and it is safe to say that most of those keys have been lost by now.  If that has happened to you and you find yourself unable to get from SETUP to OPERATE and back, here is your solution.

These keys are copies of an original Dukane Ultra-Com key made in about 1991.  Each key is tested to make sure it smoothly actuates the OPERATE/SETUP key switch on an actual Dukane unit.

Order a pair today, Use one and put one away in a safe place.

(package of two keys)

Additional information

Weight .01 lbs
Dimensions 1.75 × 0.8 × 0.2 in

You may also like…

20TV900
Ultrasonic Tooling Vise for CJ-20/CR-20/CH-20/CS-20
This stainless steel stack vise is designed specifically to clamp 20KHz converter front slugs and booster spanner "collars" during assembly or disassembly to reduce damage to expensive ultrasonic stack components. The vise features two clamping chambers, one for tooling 1.625" (41 mm) dia. and one for tooling 1.8" (46 mm) dia. The two-pin hinge design allows the upper jaw to "float" and seek the best clamp position on the tool for maximum contact. The securing bolt has a long lever handle that can be re-positioned out of the way once secured. The securing bolt can be completely removed so the upper vise jaw can be fully opened. The steel spanner-hole pins are set in stepped holes such that they can be driven out from the bottom of the vise should they ever need replacement.
$565.00 Add to cart
20spanner
Spanner Wrench 15/20KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 15 and 20 KHz transducers/converters, boosters, and horns/sonotrodes. Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
$45.00 Add to cart
ST20STEP
Step Stud 1/2-20 to 3/8-24
This is a specially heat treated steel socket-head stud with 1/2-20 threads on one end and 3/8-24 threads on the other. Used for adapting horns to boosters that do not have the same thread size. No warranty.
$22.00 Add to cart
40spanner
Spanner Wrench 30/40KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 30 and 40 KHz transducers/converters, boosters, and horns/sonotrodes. Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
$45.00 Add to cart
20 KHz Titanium Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure.  Input and output threads are 1/2-20.  Adapter studs are available if required. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5
$950.00 Add to cart
20TV900
20KHz Stack Vise for Ultrasonic Tooling
This stainless steel stack vise is designed specifically to clamp 20KHz converter front slugs and booster spanner "collars" during assembly or disassembly to reduce damage to expensive ultrasonic stack components. The vise features two clamping chambers, one for tooling 1.5" (38 mm) dia. and one for tooling 1.8" (46 mm) dia. The two-pin hinge design allows the upper jaw to "float" and seek the best clamp position on the tool for maximum contact. The securing bolt has a long lever handle that can be re-positioned out of the way once secured. The securing bolt can be completely removed so the upper vise jaw can be fully opened. The steel spanner-hole pins are set in stepped holes such that they can be driven out from the bottom of the vise should they ever need replacement.
$515.00 Add to cart
High Pressure Silicone Ultrasonic Stack Grease
The function of grease in the joint is to: 1. Fill the microscopic valleys in the surface of the tooling to improve acoustic transfer from one component to the next. 2. Remain in the joint so the metal of the two pieces of tooling do not become "clad" together by the action of the ultrasound and thus impossible to disassemble. Never use grease and a polymer washer in the same joint.
$3.50 Add to cart
20 KHz Aluminum Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure.  Input and output threads are 1/2-20.  Adapter studs are available if required. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5
$630.00 Add to cart
40 KHz Aluminum Booster 1.937 inch ring for Branson or Dukane
These 40KHz aluminum boosters are precision made from certified materials and tuned to tight frequency tolerances for trouble free operation. These boosters are recommended for all 40KHz applications for their heat-dissipating properties. They are constructed with a 1.937" diameter mounting ring set that is made to be disassembled for o-ring replacement.  Input stud is 8mm, output thread is 8mm. Fits virtually all Branson and Dukane 40 KHz systems, and many others. Check mounting ring and stud sizes to be sure. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.5, 0.7, 1.0, 1.5, 2.0, 2.5
$365.00 Add to cart