Ring Stand Holder with Clamp Blocks for 20KHz Ultrasonic Stacks

$305.00

This anodized aluminum holder clamps to almost any ring stand and securely holds an ultrasonic stack using a booster having a mounting ring with a diameter of between 2.65″ (67 mm) and 3.25″ (83 mm), which is most of the standard ones.

To mount a stack, set the holder to an appropriate height on the ring stand and simply hang the stack in the holder and clamp it with the blocks.

Description

This anodized aluminum holder clamps to almost any ring stand and securely holds an ultrasonic stack using a booster having a mounting ring with a diameter of between 2.65″ (67 mm) and 3.25″ (83 mm), which is most of the standard ones.

To mount a stack, set the holder to an appropriate height on the ring stand and simply hang the stack in the holder and clamp it with the blocks.

Not using a booster? Flip the holder over and use the other side, which is a better fit for converters with diameters between 2.65″ (67 mm) and 2.99″ (76 mm) which includes almost all 20KHz converters of at least 500 watt power capability.  You may also wish to consider model RS200 without the clamp blocks.

You should probably consider using two of these holders, one for the booster with clamp blocks and one for the converter/transducer (model RS200). It is possible that the reactor vessel you are using would be a good fit in that holder as well.

Made in USA of aircraft grade aluminum anodized and nickel sealed, and includes nickel-plated steel thumbscrew.

Additional information

Weight 1.5 lbs
Dimensions 6 × 6 × 2 in

You may also like…

RS200B2
Clamp Block Upgrade Kit for RS200 Ring Stand Holder for Ultrasonic Stacks
Set of two booster clamp blocks to upgrade a RS200 ring stand stack holder to a RS200B. Two aircraft grade aluminum anodized and nickel sealed blocks, two chemically blackened steel cap screws, and two plated steel washers. Made in USA.
$65.00 Add to cart
20spanner
Spanner Wrench 15/20KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 15 and 20 KHz transducers/converters, boosters, and horns/sonotrodes. Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
$45.00 Add to cart
20 KHz Aluminum Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure.  Input and output threads are 1/2-20.  Adapter studs are available if required. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5
$630.00 Add to cart
RS200
Ring Stand Holder for 20KHz Ultrasonic Stacks
This anodized aluminum holder clamps to almost any ring stand and securely holds an ultrasonic stack using a booster having a mounting ring with a diameter of between 2.65" (67 mm) and 3.25" (83 mm), which is most of the standard ones. To mount a stack, set the holder to an appropriate height on the ring stand and simply hang the stack in the holder. Not using a booster? Flip the holder over and use the other side, which is a better fit for converters with diameters between 2.65" (67 mm) and 2.99" (76 mm) which includes almost all 20KHz converters of at least 500 watt power capability.
$240.00 Add to cart
20TV900
20KHz Stack Vise for Ultrasonic Tooling
This stainless steel stack vise is designed specifically to clamp 20KHz converter front slugs and booster spanner "collars" during assembly or disassembly to reduce damage to expensive ultrasonic stack components. The vise features two clamping chambers, one for tooling 1.5" (38 mm) dia. and one for tooling 1.8" (46 mm) dia. The two-pin hinge design allows the upper jaw to "float" and seek the best clamp position on the tool for maximum contact. The securing bolt has a long lever handle that can be re-positioned out of the way once secured. The securing bolt can be completely removed so the upper vise jaw can be fully opened. The steel spanner-hole pins are set in stepped holes such that they can be driven out from the bottom of the vise should they ever need replacement.
$380.00 Add to cart