Ultrasound Cable Standard RF Coax SHV-SHV 3 meter

$165.00

This style of cable is used with most Dukane machines and many Branson machines.  Terminated at both ends by SHV connectors and appropriate for use with ultrasonic power supplies/generators up to and including 3000 watts power output.

Not for use with power supplies/generators rated beyond 3000 watts.

Made in USA

Description

This style of cable is used with most Dukane machines and many Branson machines.  Terminated at both ends by SHV connectors and appropriate for use with ultrasonic power supplies/generators up to and including 3000 watts power output.

Not for use with power supplies/generators rated beyond 3000 watts.

Made in USA

Additional information

Weight 0.2 lbs
Dimensions 8 × 8 × 1 in

You may also like…

20TV900
20KHz Stack Vise for Ultrasonic Tooling
This stainless steel stack vise is designed specifically to clamp 20KHz converter front slugs and booster spanner "collars" during assembly or disassembly to reduce damage to expensive ultrasonic stack components. The vise features two clamping chambers, one for tooling 1.5" (38 mm) dia. and one for tooling 1.8" (46 mm) dia. The two-pin hinge design allows the upper jaw to "float" and seek the best clamp position on the tool for maximum contact. The securing bolt has a long lever handle that can be re-positioned out of the way once secured. The securing bolt can be completely removed so the upper vise jaw can be fully opened. The steel spanner-hole pins are set in stepped holes such that they can be driven out from the bottom of the vise should they ever need replacement.
$380.00 Add to cart
20spanner
Spanner Wrench 15/20KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 15 and 20 KHz transducers/converters, boosters, and horns/sonotrodes. Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
$45.00 Add to cart
AM30122
Dukane 110-3122 Transducer Replacement
Dukane 110-3122 transducer replacement used in almost all 20KHz Ultra Series, DPC, and iQ thruster and press systems that delivers rugged quality and superior value. All-new, precision made in USA in a climate-controlled ISO-registered facility. Three year limited warranty.
$1,890.00 Add to cart
AM44C20RT
Branson CR-20S Converter Replacement (short version)
The CR-20S is only as long as it is because Branson made it using the same housing as the CR-20.  This model mounts the connectors and ground lug directly in the insulator disc of our CJ-20 replacement model (AM44C20), making the housing about 1.25" (32 mm) shorter overall, the same length as a CJ-20.  Making this model shorter lets us leave off the machined aluminum cap that makes our CR-20S replacement (AM44C20RS) about the same length as Branson's, but if it the extra length doesn't matter to you this model does exactly the same job as our CR-20S replacement model (AM44C20RS) at an even lower price,  Maybe Branson already builds one like this.  Maybe if they don't they will some day soon. This aftermarket replacement converter replaces machinery-mounted probe converter CR-20S (125-135-115R), which has a SHV jack used with coax cable to 20KHz 2000, 2000X, and DCX series power supplies.  Three-year limited warranty.  All-new precision made in the USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.
$1,860.00 Add to cart
20 KHz Titanium Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure.  Input and output threads are 1/2-20.  Adapter studs are available if required. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5
$950.00 Add to cart
CSHV03M
Ultrasound Cable Standard RF Coax SHV-SHV 11 meter

This style of cable is used with most Dukane machines and many Branson machines.  Terminated at both ends by SHV connectors and appropriate for use with ultrasonic power supplies/generators up to and including 3000 watts power output. Not for use … Continued

$210.00 Add to cart
Branson CH-20S Converter Replacement
This aftermarket replacement converter replaces sealed machinery-mounted probe converter CH-20S (159-135-075R), which has a SHV jack used with coax cable to 20KHz 2000, 2000X, and DCX series power supplies.  Three-year limited warranty.  All-new precision made in the USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.
$2,085.00 Add to cart
AM44C20
Branson CJ-20 Converter Replacement
Branson CJ-20 converter (101-135-059) replacement used in all 20KHz 2000, 2000X and DCX series IW, actuator and assembly stand systems that delivers rugged quality and superior value.  All-new, precision made in USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility. Three year limited warranty.
$1,530.00 Add to cart
RS200
Ring Stand Holder for 20KHz Ultrasonic Stacks
This anodized aluminum holder clamps to almost any ring stand and securely holds an ultrasonic stack using a booster having a mounting ring with a diameter of between 2.65" (67 mm) and 3.25" (83 mm), which is most of the standard ones. To mount a stack, set the holder to an appropriate height on the ring stand and simply hang the stack in the holder. Not using a booster? Flip the holder over and use the other side, which is a better fit for converters with diameters between 2.65" (67 mm) and 2.99" (76 mm) which includes almost all 20KHz converters of at least 500 watt power capability.
$240.00 Add to cart
20TV900
Ultrasonic Tooling Vise for CJ-20/CR-20/CH-20/CS-20
This stainless steel stack vise is designed specifically to clamp 20KHz converter front slugs and booster spanner "collars" during assembly or disassembly to reduce damage to expensive ultrasonic stack components. The vise features two clamping chambers, one for tooling 1.625" (41 mm) dia. and one for tooling 1.8" (46 mm) dia. The two-pin hinge design allows the upper jaw to "float" and seek the best clamp position on the tool for maximum contact. The securing bolt has a long lever handle that can be re-positioned out of the way once secured. The securing bolt can be completely removed so the upper vise jaw can be fully opened. The steel spanner-hole pins are set in stepped holes such that they can be driven out from the bottom of the vise should they ever need replacement.
$440.00 Add to cart
Dukane 41C30 Transducer Replacement
Dukane 41C30 probe transducer replacement used with almost all 20KHz Ultra Series, DPC, and iQ generators that delivers rugged quality and superior value. All-new, precision made in USA in a climate-controlled ISO-registered facility. Three year limited warranty.
$2,180.00 Add to cart
20 KHz Aluminum Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure.  Input and output threads are 1/2-20.  Adapter studs are available if required. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5
$630.00 Add to cart
stud
Horn/Booster Stud 1/2-20 by 1.25 for Ultrasonic Tooling
These specially heat-treated steel studs have cup points, and are chemically blackened. No warranty.
$4.50 Add to cart
AM44C20RS
Branson CR-20S Converter Replacement
This aftermarket replacement converter replaces machinery-mounted probe converter CR-20S (125-135-115R), which has a SHV jack used with coax cable to 20KHz 2000, 2000X, and DCX series power supplies.  Three-year limited warranty.  All-new precision made in the USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.
$2,000.00 Add to cart
ST20STEP
Step Stud 1/2-20 to 3/8-24
This is a specially heat treated steel socket-head stud with 1/2-20 threads on one end and 3/8-24 threads on the other. Used for adapting horns to boosters that do not have the same thread size. No warranty.
$22.00 Add to cart
40spanner
Spanner Wrench 30/40KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 30 and 40 KHz transducers/converters, boosters, and horns/sonotrodes. Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
$45.00 Add to cart