Branson 922JA Converter Replacement

$1,260.00

Replacement converter for Branson model 922JA (101-135-049), for use with 920IW or IW+ model integrated benchtop welders or 920 D/M (2000 watt) power supplies using actuator or assembly stand. All-new, precision made in USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.  Three year limited warranty.

Description

Made in USA direct replacement for Branson 922JA converter (101-135-049) that delivers superior quality and ruggedness with superior value.

All of the parts used in these converters are new, not recovered from scrapped units. These converters are made in a highly controlled and repeatable manner to duplicate the performance of the OEM models. The parts are made from certified materials in tightly controlled manufacturing processes, assembled and tested in a climate-controlled environment in an ISO registered facility using carefully calibrated equipment, then properly aged and re-tested to ensure performance that duplicates the OEM part. Best of all, since the manufacturing process is so carefully controlled, durability is assured.

Our converters do not look like a Branson 922JA even though specifically designed to replace them. Chrome plating is expensive and non-functional. We note that many suppliers who copy Branson’s appearance also use the 922JA model designation, possibly to make buyers they are getting a 922JA made by Branson.

Shortly after introducing the 900 series 2000W units in about 1986, Branson discovered that some high-power applications would not run properly.  They solved this problem by adding a circuit board with the primary function of adding additional capacitance to the 922J converter and renamed it 922JA.  Our 922JA replacement converter (AM20922) contains such a circuit board just below the insulator disc to match Branson 922JA performance..

We actually made some mechanical improvements to the OEM design to make these units more durable. We left no stone unturned to try to give you the best product anyone knows how to make. We are proud to make a unit that looks different and probably outperforms the OEM unit.  As with replacement parts for automobiles, often the aftermarket part is much better and less expensive than the OEM part.

We offer the same warranty as the OEM, namely, three years one-time replacement. Simply ship the broken unit back to arrive within three years of original shipment, and it will be replaced (one time) if failure is caused by a defect in materials or workmanship. See the warranty link below for the particulars.

We have grown steadily into one a leading replacement converters suppliers so we are obviously doing something right.

Additional information

Weight 3.7 lbs
Dimensions 12 × 6 × 5 in

You may also like…

20spanner
Spanner Wrench 15/20KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 15 and 20 KHz transducers/converters, boosters, and horns/sonotrodes. Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
not rated $36.00 Add to cart
Polymer (Mylar) Washers for Stack Joints (35 pack)
These washers made of heat-resistant Mylar(TM) can be used instead of high pressure silicone grease in ultrasonic stack joints. IMPORTANT: Use a new washer each time the tooling is reassembled. Do not use both grease and a washer in the same joint. Washers come 35 to a pack. Order the number of packs you want, not the number of washers.
not rated $26.50 Select options
20 KHz Titanium Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure.  Input and output threads are 1/2-20.  Adapter studs are available if required. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.24, 1.5, 1.75, 2.0, 2.5
not rated $795.00 Select options
ST20STEP
Step Stud 1/2-20 to 3/8-24
This is a specially heat treated steel socket-head stud with 1/2-20 threads on one end and 3/8-24 threads on the other. Used for adapting horns to boosters that do not have the same thread size. No warranty.
not rated $16.00 Add to cart
20 KHz Aluminum Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure.  Input and output threads are 1/2-20.  Adapter studs are available if required. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.24, 1.5, 1.75, 2.0, 2.5
not rated $535.00 Select options
High Pressure Silicone Ultrasonic Stack Grease
The function of grease in the joint is to: 1. Fill the microscopic valleys in the surface of the tooling to improve acoustic transfer from one component to the next. 2. Remain in the joint so the metal of the two pieces of tooling do not become "clad" together by the action of the ultrasound and thus impossible to disassemble. Never use grease and a polymer washer in the same joint.
not rated $1.95 Add to cart
AM44C20
Branson CJ-20 Converter Replacement
Branson CJ-20 converter (101-135-059) replacement used in all 20KHz 2000, 2000X and DCX series IW, actuator and assembly stand systems that delivers rugged quality and superior value.  All-new, precision made in USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility. Three year limited warranty.
not rated $1,385.00 Add to cart
20TV900
20KHz Stack Vise for Ultrasonic Tooling
This stainless steel stack vise is designed specifically to clamp 20KHz converter front slugs and booster spanner "collars" during assembly or disassembly to reduce damage to expensive ultrasonic stack components. The vise features two clamping chambers, one for tooling 1.5" (38 mm) dia. and one for tooling 1.8" (46 mm) dia. The two-pin hinge design allows the upper jaw to "float" and seek the best clamp position on the tool for maximum contact. The securing bolt has a long lever handle that can be re-positioned out of the way once secured. The securing bolt can be completely removed so the upper vise jaw can be fully opened. The steel spanner-hole pins are set in stepped holes such that they can be driven out from the bottom of the vise should they ever need replacement.
not rated $380.00 Add to cart
stud
Horn/Booster Stud for Ultrasonic Tooling
These specially heat-treated steel studs have cup points, and are chemically blackened. No warranty.
not rated $1.95 Select options