Mid-Com Monitor/Keyboard for Ultra-Com or DPC III

$500.00

Working Mid-Com monitor/keyboard with cables for Dukane Ultra-Com or DPCIII.

1 in stock

Description

This Mid-Com monitor and keyboard is one of the last of the last of three monitor/keyboard pairs to be used with the Ultra-Com (43x-3xx) and DPCIII model Dukane ultrasonic welders.

This is a classic terminal setup with large-format serial port communications.  Includes a keyboard with missing space bar (not something you’d use a lot in this application even if you had one) power cable, serial cable, extension keyboard cable.

There are many Ultra-Com (43x-3xx) and DPC units out there going back to the late 80s, but not many compatible terminals.  The original Falco was an ideal fit because of the multi-page feature.  When Falco went out of business a firmware-modified Sherwood terminal was used.  When Sherwood went out of business, these firmware-modified Mid-Coms picked up the mantle and shipped through the end of the serial-port-era Dukane DPCIII ultrasonic welders in the late 1990s and early 2000s.

While the rest of the Dukane welder was built like industrial equipment for the shop environment, the terminals were built for an office environment and usually didn’t survive for more than five or seven years.  This one is the exception to that rule.

We didn’t want to wreck it by cleaning it up too much.  You are weldome to try to make it look better if you want to risk it.

So, if you’ve been looking for a working Dukane-compatible Falco, Sherwood or Mid-Com, here it is.  You may never see another one.

Additional information

Weight 21 lbs
Dimensions 18 × 18 × 14 in
Booster Gain

0.5, 0.75, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5

You may also like…

Dukane 20 kHz 1700 Watt DPCIII Press System 30 Day Money Back

This was Dukane’s near top-of-line-product in the early 2000s, fully tested, sold on a 30-day money-back basis.  Ships with a new tributek AM30122 transducer with three-year limited warranty and titanium or aluminum tributek booster of your choice (1/2-10 in/out and … Continued

$7,700.00 Add to cart
Pair of Keys for Dukane Ultra-Com or DPCIII

Thousands of Dukane Ultra-Coms and DPCIIIs shipped all over the world between 1985 and 2008.  All of them shipped with two keys, and it is safe to say that most of those keys have been lost by now.  If that … Continued

$17.00 Add to cart
20 kHz 2200 watt DPC/Ultra-Com Hybrid Press System
Dukane 210 press with long column and column collar, Ultra-Com controller, DPC-I 2200 watt 20 kHz generator, tributek AM30122 transducer, new titanium booster (you specify ratio), all necessary cables.
$4,750.00 Add to cart
40 kHz 700 Watt Dukane Ultra-Com Press System
40 kHz 700 Watt Dukane Ultra-Com System
This is a late 1980s/1990s Dukane 40 kHz 700 watt Ultra-Com system that welds by time, absolute distance, collapse distance, energy or peak power, with programmable secondary controls and bad or suspect part limits on all primary parameters.  This system has a second generation Ultra-Com weld controller.
$2,300.00 Add to cart