Reconditioned Branson CJ-20 Converter Replacement

$1,200.00

Branson CJ-20 converter (101-135-059) replacement used in all 20KHz 2000, 2000X and DCX series IW, actuator and assembly stand systems that delivers rugged quality and superior value.  Reconditioned, made from all-new parts, precision made in USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.

1 in stock

Description

Our loss is your gain!

We originally sold this converter for US$1,530.00.  The customer asked to return to us for evaluation because it would not run on his machine.  We evaluated it and found the electrical and acoustic characteristics to be the same as when we originally shipped it.  We attached a booster to it, retested it, ran it under load, and it passed with flying colors.  We sent the converter and booster (assembled) back to the customer and asked him to do an ultrasound test using that assembly.  He said it still would not run.

It turns out of the three converters he had on hand before purchasing this one, only one would run on his 20+ year old welder.  We suggested he consider getting his power supply serviced.  He sent this converter back and asked for a refund, which we promptly sent him no further questions asked.

So, since this item is now no longer legally new having been on a customer’s machine, we cannot sell it as new.

We now offer this item as refurbished, 30 days money back, one year repair/replace warranty if defective in materials or workmanship (warranty does not cover wear and tear or abuse) for US$1,200.00.

Following is our description of the item when sold new:

All of the components used in construction of these Branson CJ-20 replacement converters are all new, not recovered from scrapped units. These converters are made in a highly controlled and repeatable manner to duplicate the performance of the OEM models. The parts are made from certified materials in tightly controlled manufacturing processes, assembled and tested in a climate-controlled environment using carefully calibrated equipment, then properly aged and re-tested to ensure performance that duplicates the OEM part. The entire process is conducted in a ISO registered facility. Best of all, since the manufacturing process is so carefully controlled, durability is assured.

Our converters do not look like a Branson CJ-20 even though specifically designed to replace them. Chrome plating is expensive and non-functional, as is grooving the housing. We note that many suppliers who copy Branson’s appearance also use the CJ-20 model designation, possibly to cause buyers to think they are getting a CJ-20 made by Branson.

We worked very hard to incorporate functional improvements to the OEM design to make these units more durable. We left no stone unturned to try to give you the best product anyone knows how to make. We are proud to make a unit that looks different and probably outperforms the OEM unit. As with replacement parts for automobiles, often the aftermarket part is much better and less expensive than the OEM part.

Additional information

Weight 3.5 lbs
Dimensions 12 × 6 × 5 in

You may also like…

ST20STEP
Step Stud 1/2-20 to 3/8-24
This is a specially heat treated steel socket-head stud with 1/2-20 threads on one end and 3/8-24 threads on the other. Used for adapting horns to boosters that do not have the same thread size. No warranty.
$22.00 Add to cart
High Pressure Silicone Ultrasonic Stack Grease
The function of grease in the joint is to: 1. Fill the microscopic valleys in the surface of the tooling to improve acoustic transfer from one component to the next. 2. Remain in the joint so the metal of the two pieces of tooling do not become "clad" together by the action of the ultrasound and thus impossible to disassemble. Never use grease and a polymer washer in the same joint.
$3.50 Add to cart
Branson CR-20 Converter Replacement
Aftermarket replacement converter for Branson model CR-20 using the military-style connector, for use with 20KHz 2000, 2000X and DCX series power supplies. Precision made in USA (ask Branson where they make theirs) in a climate-controlled ISO-registered facility.  Three year limited warranty.
$1,890.00 Add to cart
20spanner
Spanner Wrench 15/20KHz Hinged Cast
This durable cast steel spanner wrench is of the hinged style. It is appropriately sized to fit most 15 and 20 KHz transducers/converters, boosters, and horns/sonotrodes. Price shown is for one only. In most cases, you will need a pair, so order two. Warranty is one year, one time replace.
$45.00 Add to cart
20 KHz Titanium Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure.  Input and output threads are 1/2-20.  Adapter studs are available if required. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5
$950.00 Add to cart
stud
Horn/Booster Stud 1/2-20 by 1.25 for Ultrasonic Tooling
These specially heat-treated steel studs have cup points, and are chemically blackened. No warranty.
$4.50 Add to cart
20 KHz Aluminum Booster 3.25 inch ring for Branson or Dukane
Fits all Branson 5170, 501, 8800, 851, 900 series and 2000 series standard actuators, assembly stands, and IW systems, Dukane 43x2xx presses and thrusters, Sonics and Materials E, F, and G systems, and many Ultra Sonic Seal systems. Check mounting ring and stud sizes to be sure.  Input and output threads are 1/2-20.  Adapter studs are available if required. All-new, precision made in USA. One year limited warranty. PLEASE SPECIFY GAIN RATIO: 0.4, 0.5, 0.6, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5
$630.00 Add to cart
20TV900
Ultrasonic Tooling Vise for CJ-20/CR-20/CH-20/CS-20
This stainless steel stack vise is designed specifically to clamp 20KHz converter front slugs and booster spanner "collars" during assembly or disassembly to reduce damage to expensive ultrasonic stack components. The vise features two clamping chambers, one for tooling 1.625" (41 mm) dia. and one for tooling 1.8" (46 mm) dia. The two-pin hinge design allows the upper jaw to "float" and seek the best clamp position on the tool for maximum contact. The securing bolt has a long lever handle that can be re-positioned out of the way once secured. The securing bolt can be completely removed so the upper vise jaw can be fully opened. The steel spanner-hole pins are set in stepped holes such that they can be driven out from the bottom of the vise should they ever need replacement.
$440.00 Add to cart